MWC_10_test.cellml

MWC-10 model experiment

In the MWC_10_experiment, the MWC-10 model is configured and parameterised with an applied voltage clamp protocol.

You can change the parameters of stimulation in the component clamp_para. You can also bypass the parameters in the components free_para_10 and Para, and define your own parameters.

Steady states

Figure [1] shows the voltage dependencies and transfer function.

Kinetic transients

Figure [2] shows charge movement transients in reference simulation with different test voltages.

Figure [3] shows charge movement transients in perchlorate simulation with different test voltages.

Figure [4] shows the open probability and charge movement current when 908 parameters are used.

Figure [5] shows the open probability and charge movement current when 827 parameters are used.